print this page print email this solution email

Title: Setting up the RE2000, RE2000 v2 and RE4000W using the Setup Wizard

Article ID: 28846

The Linksys Dual-Band Wireless-N Range Extenders (RE2000, RE2000 v2 and RE4000W) can be set up either through manual configuration or using the Setup Wizard.  This article will guide you on how to set up your range extender using the Setup Wizard.

Before you start the setup process, make sure that you have the following:

QUICK TIP:  The SSID and Security Key are your wireless network’s settings.  If you do not have these settings, contact your router’s manufacturer for assistance in getting them.  If you are using a Linksys router, click here to learn how to check your wireless settings through its web-based setup page.  If you're using the Linksys Connect software to check the settings, click here.

NOTE:  If you already tried installing the range extender and encountered an error, you can download the latest setup software here.  You may also need to reset the range extender before you proceed with the steps below.  To learn more about resetting your range extender, click here.

Step 1:
Insert the Setup CD into your optical (CD/DVD ROM) drive.  When the AutoPlay window appears, click the Setup your Linksys Range Extender option.

NOTE:  If you have downloaded the Setup Wizard or do not see the AutoPlay window, go to your computer’s local drive and double-click the icon to proceed.


Step 2:
When the End-User License Agreement window appears, check the I have read and accept the License Terms for using this software box, and then click Next to continue.

Step 3:
Wait while the software is preparing to set up the wireless connection with your router and range extender.


Step 4:
Once your wireless connection has been detected, plug your range extender into an electrical outlet and then click Next.

The software will search for your range extender and will attempt to connect to your wireless network.


QUICK TIP:  To make sure that your range extender is easily detected, ensure that it is within close range to the router at this point of installation.


Once the software connects to your range extender, it will search for available wireless networks.


Step 5:
Select the wireless network name (SSID) of your router and then, click Next.

QUICK TIP:  If your wireless network is hidden, click My network is hidden then manually enter your wireless network settings.  Click OK then proceed to Step 7.

Step 6:
Enter the wireless network’s password if there is any then click OK.

NOTE:  WPA keys are case sensitive (abc is different from ABC).  WEP keys are hexadecimal (0-9 and a-f) characters and are not case sensitive.

The screen will display that your range extender is being set up.


Step 7:
You will be given an opportunity to transfer your range extender to your desired location.  Follow the on-screen instructions and then, click Next.

The software will check your range extender’s connection to the wireless network.


Step 8:
A window should appear to inform you that your range extender has been set up successfully.  Click Close to end the setup process.

NOTE:  When you check your wireless network connection, you will no longer see the range extender's name.  Instead, it will show that you are connected to your router.

Related Articles:

Getting to know the Linksys RE2000
Getting to know the Linksys RE2000 v2
Getting to know the Linksys RE4000W
Manually configuring a wireless range extender
Configuring the Linksys range extender with a gateway using Site Survey
Setting up the range extender through a wired connection


© 2015 Linksys. All rights reserved.