How to automatically update the firmware of the Linksys Smart Wi-Fi Routers

Firmware updates are bug fixes and functionality enhancements for the router.  Keeping the firmware of your Linksys device updated is important because it fixes issues you may encounter while using it.  An updated firmware downloaded from the Linksys Support site may also contain device feature enhancements that are not available in the previous versions.
 
Ways you can keep your Linksys Smart Wi-Fi Routers' firmware updated:

Using the Check for Updates button
Enabling Automatic update

Alternatively, you can do a manual firmware update by downloading the firmware and uploading it to the router.  Click the link below to learn how to manually upgrade your Linksys Smart Wi-Fi Router's firmware:

Manually upgrading a Linksys Smart Wi-Fi Router's firmware

Using the Check for Updates button


Step 1:
Log in to your Linksys server account.  Once the web interface opens, click Connectivity.

NOTE:  If you don't have a Linksys server account, click here for instructions on how to access your router's settings without logging in to a Linksys server account.

User-added image

Step 2:
Under the Firmware Update section under the Basic tab, click Check for Updates.

Step 3:
Once the router detects a firmware update, you will be able to download and install the firmware on your device.  Select the Click here link to upgrade.

NOTE:  If the No updates found message is displayed, it means that your router has the latest firmware version.

Step 4:
On the Update firmware pop-up box, click Yes.

Your router will start updating the firmware.

IMPORTANT:  During this process, do not power OFF the router or close the browser window to avoid corrupting the firmware of your router.

QUICK TIP:  In case you see a prompt to try again later, the server may be slow or not available for the moment.  Try to upgrade the router again at a later time to resolve the issue.


Step 5:
A Router Reboot screen will pop up.  Click Ok to continue.

NOTE:  The router reboot process usually takes a few minutes.


Step 6:
Once the firmware upgrade is complete, click Ok on the Firmware update complete screen.

Enabling Automatic update


Step 1:
Log in to your Linksys server account.  Once the web interface opens, click Connectivity.

NOTE:  If you don’t have a Linksys server account, access the router's web-based setup page by opening a web browser and entering "http://myrouter.local" or "192.168.1.1" in the Address bar and pressing [ENTER].

User-added image

Step 2:
Under the Firmware Update section, check the box to enable the Automatic firmware update option.  Once done, click Apply to save the changes.

NOTE:  On the Linksys Smart Wi-Fi Routers, the automatic firmware update feature is disabled by default.


When online, the router will be able to detect available updates for you to apply on your device.

Step 3:
On the Update firmware pop-up box, click Yes.

Your router will start updating the firmware.

IMPORTANT:  During this process, do not power OFF the router or close the browser window to avoid corrupting the firmware of your router.

Step 4:
A Router Reboot screen will pop up.  Click Ok to continue.

Wait while the router reboots.  This usually takes a few minutes.


Step 5:
Once the firmware upgrade is complete, click Ok on the Firmware update complete screen.

You should now have an updated firmware on your Linksys Smart Wi-Fi Router.


QUICK TIP:  For information regarding updated drivers for a particular operating system, you may refer to the Release Notes found in the Downloads tab of your Linksys device's product page.


Related Articles:

Checking the Linksys router’s firmware version
Changing the Wi-Fi settings using the Linksys cloud account
How to check and update the router password using your Linksys cloud account
How to turn OFF my router’s or gateway’s Wi-Fi

這篇支援文章有幫助嗎?

尚有其他支援問題?
重新搜尋