Overview of the Security settings for the Linksys Dual-Band WiFi Router

The Linksys Dual-Band WiFi Router lets you enjoy the power of Wi-Fi technology.  It delivers enhanced speed, range, and security for all your networking needs which allows you to swiftly stream HD videos, surf, email, play games online, browse, and chat.

This article gives you an overview of the Security settings for your Linksys Dual-Band WiFi Router. 


NOTE:  The options may vary depending on your router's model.  

To access the Security settings, follow these steps:

 
Step 1:
Access the web interface of your router.  For instructions, click here.

Step 2:
Go to the Configuration tab.

Step 3:
Click on Security.

 
User-added image

The table below shows the settings that can be configured under Security:
 
FeatureDescription
Firewall
For advanced users, you can configure your Firewall settings on this page.  Below are the default settings.

NOTE:  The options may vary depending on the model of your router.

 
User-added image
 
DMZ
This page allows you to configure your Demilitarized Zone (DMZ) settings.  Check the box beside DMZ to begin configuration.  For more information, click here.
 
User-added image
 
DDNS
The DDNS page allows you to enable and configure your Dynamic Domain Name System (DDNS) settings.  Select your preferred DDNS Service, enter your account information, then click Save.  Check the status of your DDNS connection to make sure you're connected.

NOTE:  The options may vary depending on the model of your router. 

 
User-added image


For more information on DDNS, click here.
 

VPN Passthrough
By default, all three options are enabled.  For additional information, click here.
 
User-added image
 
IPv6 Firewall
This screen lets you configure the IPv6 Firewall settings as needed.
 
User-added image
 
QoS
Configure your QoS (Quality of Service) settings and Internet Access Priority.  Check the box before Internet Access Priority to begin configuration.  You can choose between the following categories:  Applications, Online Games, MAC Address and Voice Device.
 
User-added image
 
For additional information, click here.
 
Single Port Forwarding
Configure Single Port Forwarding by clicking on Add a New Single Port Forwarding.
 
User-added image

Select your preferred Application and fill out the required fields.  Make sure to check Enabled and click Apply when you're done.
 
User-added image
 
For more information, click here.
 
Port Range Forwarding
Configure Port Range Forwarding by clicking on Add a New Port Range Forwarding.
 
User-added image

Fill out the required fields then make sure to check Enabled and click Apply when you're done.
 
User-added image
 
For more information, click here.
 
Port Range Triggering
Configure Port Range Triggering by clicking on Add a New Port Range Triggering.
 
User-added image

Fill out the required fields then make sure to check Enabled and click Apply when you're done.
 
User-added image
 
For more information, click here.
 

Was this support article useful?

Additional Support Questions?
Search Again