Enabling the Fast Roaming (802.11r) feature of your Linksys LAPAC2600 access point

The access point’s Fast Roaming (802.11r) mechanism minimizes the delay when a voice client transitions from one Basic Service Set (BSS) to another within the same Extended Service Set (ESS).  This feature is only operational if the wireless client supports the 802.11r standard. 

Follow the steps below to know how to enable the 802.11r feature of your Linksys LAPAC2600 access point:

 
Step 1:
Access the web-based setup page.  To know how, click here.

Step 2:
Select Configuration > Wireless > Security.
 
User-added image

Step 3:
Select WPA2-Personal or WPA2-Enterprise as your Security Mode.
 
NOTE:  Only when selecting WPA2-Personal or WPA2-Enterprise will you have the Fast Roaming (802.11r) option available.

Step 4:
Configure the Security Settings of your wireless network.

Step 5:
Tick the Fast Roaming (802.11r) box to enable the 802.11r feature and click the Save button.

 
NOTE:  If Fast Roaming (802.11r) is enabled, some clients' access points without the 802.11r feature may fail to connect to the network. 

Was this support article useful?

Additional Support Questions?
Search Again