Getting to know the Linksys RE6300 AC750 BOOST WiFi Range Extender

The Linksys RE6300 AC750 BOOST WiFi Range Extender is a plug-in range extender that can increase the range of your main WiFi with its two non-detachable external antennas.  The single gigabit ethernet port allows wired ethernet devices, such as computers and media servers, to be bridged to the main WiFi.  The Linksys RE6300 can also be used as a wired range extender (Access Point mode) or a wireless range extender (Range Extender mode).
 
Front Panel

 
User-added image User-added image
 Version 1                                                         Version 2
 
Side Panel

User-added image  User-added image
Version 1                                              Version 2
 

Bottom Panel

User-added image
Version 1 and 2

Product Features
 
  • AC750 Concurrent dual-band (2.4 GHz and 5 GHz)
  • IEEE 802.11ac
  • Compatible with 802.11a/b/g/n/ac
  • Two external non-detachable antennas
  • 2x2 Spatial streams (2.4 GHz)
  • One gigabit ethernet port
  • Browser-based setup
  • Spot Finder technology 
  • Wi-Fi Protected Setup™ (WPS) support
  • WiFi security
  • Cross Band technology
  • Beamforming technology
  • Boosts WiFi range up to 1,000 sq ft
  • IPv6 support
  • Weight:  0.21 kg (0.46 lb)
  • Dimensions:  121 mm x 87 mm x 60 mm
  • Power supply rating (internal AC / DC): 
  • 100V to 240V
  • 0.5A
  • 50/60 Hz

Hardware
 
  • WPS button – Tap the WPS button to automatically and securely pair your WiFi devices with the Linksys RE6300.
  • Reset button – To reset the range extender, press and hold the reset button for 10 to 20 seconds until the light starts to blink green, then release the button.  When the light turns to blinking orange, it is ready for setup again.
  • ETHERNET port – Use this port to connect wired clients such as computers or media servers when the Linksys RE6300 is in Range Extender mode or connect to a router when it is in Access Point mode.  It will illuminate green when a device is connected and active.  It will blink when sending or receiving data over the ethernet port.  
 
Product Requirements

 
  • An active WiFi network
  • AC power outlet
  • Ethernet cable if using the Linksys RE6300 in Access Point mode
  • Browser
  • Internet Explorer® 8 or higher
  • Safari® 5.1 for Mac® or higher
  • Google Chrome™ 25.0 or higher
  • Firefox® 20 or higher
 
Package Contents
 
  • One Linksys RE6300 AC750 BOOST WiFi Range Extender 
  • Quick start guide
  • Regulatory information

Was this support article useful?

Additional Support Questions?
Search Again