Linksys devices that support IPv6

The table below shows the Linksys routers and gateways that support Internet Protocol version 6 (IPv6). However, the firmware for the Linksys E4200 may need to be upgraded to enable IPv6 support.

NOTE: To download the latest firmware releases, visit the
Linksys Support Site. If you need instructions on how to download the latest drivers or firmware from the Linksys support site, click here.

The following firmware releases for the specified routers currently support the IPv6 functionality:
Linksys Wi-Fi Routers
Model
Release date
Firmware version
E1200
July 13, 2016
2.0.07 (build 5)
E1500
April 25,2014
1.0.06 (build 1)
E2500
June 16, 2016
3.0.02 (build 2)
E3200
July 1, 2014
1.0.05 (build 2)
E8400
July 14, 2016
1.0.00.012
E900
January 16, 2015
1.0.06

Linksys Smart Wi-Fi Routers

All Linksys Smart Wi-Fi Routers are compatible with the IPv6 functionality.

Linksys Business Access Points
Model
Release date
Firmware version
LAPN300
October 31, 2016
1.1.00.002
LAPN600October 31, 20161.1.00.002
LAPAC1200July 27, 20161.1.01.000
LAPAC1750July 27, 20161.1.01.000
LAPAC2600August 3, 20161.0.01.000
LAPAC1750PROAugust 26, 20161.0.7.007
Linksys Modems and Gateways
Model
Release date
Firmware version
X1000
June 10, 2015
1.0.01.005

IMPORTANT: The devices listed above are compatible with the IPv6 functionality. This means that older Linksys devices may not support the IPv6 protocol until further updates.
Related Articles:

這篇支援文章有幫助嗎?

尚有其他支援問題?
重新搜尋