Setting up the WiFi MAC Filters feature using the Linksys app

The WiFi MAC Filters option of the Linksys app is a security feature that either allows or blocks specific MAC addresses from connecting to your WiFi.
To configure the WiFi MAC Filters feature, follow the steps below.
 
Step 1:
Connect your mobile device to your router's WiFi then open the Linksys app.

Step 2:
Log in to your Linksys cloud account. If you are using an iOS device, click here. If you are using an Android™ device, click here.

Step 3:
On the Dashboard, tap the menu icon on the upper-left corner.
iOSAndroid
sf203487-001_en_v5.pngsf203487-002_en_v5.png

Step 4:
Tap Advanced Settings and select WiFi MAC Filters.
sf203487-003_en_v5.png

Step 5:
Tap Edit at the top-right corner of the screen to change the WiFi MAC Filters settings.
Step 6:
Select which WiFi MAC Filter to use.
sf203487-004_en_v5.png
 
Allow Access – Only MAC addresses in the list are allowed to join the network. Enter the MAC address of the wireless device you want to allow access, then tap Add a Rule. Alternatively, you may tap on the Select from device list option. Make sure to tap Save at the top-right corner of the screen.

Deny Access – All MAC addresses except those in the list are allowed to join the network. Enter the MAC address of the device you want to deny access, then tap Add a Rule. Alternatively, you may tap on the Select from device list option. Make sure to tap Save at the top-right corner of the screen.

NOTE: If you choose to disable this feature, tap Off and Save to apply the changes.
 

這篇教學文章是否有用？

您有其他支援方面的問題嗎？
再次搜尋