How to disable Wi-Fi (Verizon)

This article will walk you through general instructions on how you can disable the Wi-Fi on the listed Verizon-supported devices.
  • Fios Quantum Gateway / Fios Actiontec MI424WR / Actiontec GT784WNV
  • D-Link® DSL-2750B

NOTE: Steps and instructions may vary depending on your gateway’s model. If your model is not on the list below, contact your device’s manufacturer for support.

Before you begin
  • Make sure the computer you use to access the web-based setup page of your router or gateway is either wired directly to it or is connected via Wi-Fi.
  • Make sure to know your login credentials as these differ for every manufacturer. Contact your device’s manufacturer for support.

Fios Quantum Gateway / Fios Actiontec MI424WR / Actiontec GT784WNV
Step 1:
Launch a browser, enter “https://192.168.1.1” in the address bar, and press [ENTER].

Step 2:
Enter the login credentials for your device.

Step 3:
Click on WIRELESS SETTINGS.

User-added image

Step 4:
Click on Basic Security Settings.

User-added image

Step 5:
Click the Off radio buttons of both bands (2.4 GHz and 5 GHz).

User-added image

Step 6:
Click Apply.

D-Link® DSL-2750B
Step 1:
Launch a browser, enter “https://192.168.1.1” in the address bar, and press [ENTER].

Step 2:
Enter the login credentials for your device.

Step 3:
Click on Wireless Setup.
User-added image

Step 4:
Under WIRELESS NETWORK SETTINGS, uncheck the Enable Wireless option.

User-added image

Step 5:
Click on Apply Settings.

這篇教學文章是否有用?

您有其他支援方面的問題嗎?
再次搜尋