Linksys MR9000 Frequently Asked Questions

TABLE OF CONTENTS
 
HARDWARE INFORMATION

 

SETUP AND INSTALLATION
 

WIRELESS CONNECTION AND SECURITY
 

ADVANCED CONFIGURATION
 


HARDWARE INFORMATION

1.  What is the Linksys MR9000 Max-Stream AC3000 Tri-Band Mesh WiFi 5 Router?

The Linksys MR9000 Max-Stream AC3000 Tri-Band Mesh WiFi 5 Router is an Intelligent Mesh-compatible router that supports both parent and child modes.  With built-in Mesh Wi-Fi, this router is designed to scale to your household’s Wi-Fi needs while providing high-speed connection to multiple devices simultaneously.  The Linksys MR9000 delivers superior speeds of up to 3000 Mbps ideal for best surfing experience, movie streaming and online gaming.  To know more, click here.

2.  What is the warranty period of the Linksys MR9000?

The warranty period for Linksys MR9000 is 1 year.

3.  Where can I find the router’s serial number?

The router’s serial number is printed on the product label located underneath the Linksys MR9000.  You can also locate this via the web interface on the Troubleshooting > Status > Report.

4.  What can I connect to the USB port?

The Linksys MR9000 has an External Storage feature through the USB 3.0 port at the back for connecting an external storage device to share on the network.  This feature is only supported when the router is on parent mode.  If you connect a USB drive to a router on child mode, the drive will not be detected.  To learn more about this, click here.

SETUP AND INSTALLATION
 
1.  How do I set up the Linksys MR9000?

Setting up the Linksys MR9000 is made fast and easy.  For instructions, click here.

2.  Can I set up the Linksys MR9000 with a browser?

Yes, you can set up the Linksys MR9000 with a web browser.

3.  What is the default IP address and router password of the Linksys MR9000?

The default IP address for this router is 192.168.1.1 and the default router password is admin.

4.  How do I set up my Linksys MR9000 to bridge mode using my Linksys server account?

To learn how to set up the Linksys MR9000 to bridge mode, click here.

5.  I have an existing Velop node as the parent node, can I add a Linksys MR9000 as a child?

If you have an existing Linksys WHW01 or Linksys WHW03x node set up as the parent node, for best performance, you will need to reset these existing nodes in the network.  Then, set up the Linksys MR9000 as the parent node and add all your other nodes as child nodes.  To guide you in setting up your devices, click on the link below.

Adding another Linksys Mesh Router to your network

6.  Is the Linksys Mesh WiFi system compatible with Starlink?

Yes.  For the Linksys router to work with Starlink, you will need a Starlink ethernet adapter which you can find in the Starlink shop.  Connect one end of the ethernet cable to the Starlink ethernet adapter and the other end to the Internet port of your Linksys router.  
Learn how to set up the Linksys router with Starlink. 

FIRMWARE UPGRADE


1.  How do I upgrade the firmware on the Linksys MR9000?

The Auto Firmware Update feature allows your router to automatically update whenever there is a new firmware available.  By default, this feature is enabled on the Linksys MR9000.  If you want to disable auto-updates, click here.  For instructions on how to manually upgrade the router’s firmware, click here.

WIRELESS CONNECTION AND SECURITY


1.  What wireless security mode does the Linksys MR9000 support?

The Linksys MR9000 supports WPA2™ Personal security mode.

2.  Which wireless connection standards and frequencies are supported by the Linksys MR9000?

The Linksys MR9000 is compatible with 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ac.  It supports the 2.4 GHz and 5 GHz frequencies.

3.  How do I connect a wireless device to the Wi-Fi network of the Linksys MR9000?

To connect wireless devices to the Wi-Fi, you’ll need to know your wireless settings such as the Wi-Fi name and password.

4.  Where can I see the default Wi-Fi name and password of the Linksys MR9000?

The default Wi-Fi name and password can be located at the product label underneath the Linksys MR9000.

5.  How many clients can connect to the Guest Network of the Linksys MR9000?

Since the Wi-Fi Guest Network also uses WPA2 security, you can connect up to as many clients as long as you have available IP addresses.  With this, your guests can access the internet but not the local network (i.e., shared storage devices).

ADVANCED CONFIGURATION


1.  Does the Linksys MR9000 allow VPN tunnels using IPSec, L2TP or PPTP protocols to pass through the router?

Yes.  The Linksys MR9000 allows VPN tunnels using IPSec, L2TP or PPTP protocols to pass through the router.

2.  Does the Linksys MR9000 support SPI firewall?

Yes.  The Linksys MR9000 supports SPI firewall.

3.  What is Demilitarized Zone (DMZ) and what is it used for?

The DMZ screen allows one local user to be exposed to the internet for use of a special-purpose service such as internet gaming and videoconferencing.  DMZ hosting forwards all the ports at the same time to one computer.  Port Forwarding is more secure because it only opens the ports you want to open.

4.  What DDNS providers does the Linksys MR9000 support?

The Linksys MR9000 supports Dyn.com and NO-IP.com providers.

TROUBLESHOOTING


1.  How can I reset the Linksys MR9000 to factory defaults?

For instructions in resetting the Linksys MR9000, click here.

2.  I have reset the Linksys MR9000 and now I can’t launch the setup page.  What should I do?

You can try the following troubleshooting suggestions:
  • Access your Linksys server account locally.  To know how, click here.
  • If your computer has a static IP address, make sure it has valid DNS numbers.  If not, set the computer to obtain an IP address automatically.
QUICK TIP:  Try again, and then if needed, reassign a static IP address back on the computer.

3.  What should I do if I can't connect to the internet wirelessly and my network name is not listed in the Available Networks?

Try to perform the following steps to resolve the issue: 
  • Verify that your router is ON and the Power logo is solidly lit.
  • If you are far from the router, you might try moving closer to see if your device is out of the Wi-Fi range.
  • Using a computer wired to the router, open the router's web-based setup page by entering “myrouter.local” or “https://192.168.1.1” and make sure that Broadcast SSID is ON.
  • Turn the router OFF and power it back ON. 
4.  Does the Linksys MR9000 support Linksys Shield?

The Linksys MR9000 does not support Linksys Shield but it has support for the basic Parental Controls.

5.  Can I also block HTTPS websites in Parental Controls?

Yes, website addresses starting with https:// can be blocked in Parental Controls.  Also, since they have encryption, the Linksys server cannot redirect you.  Instead of a page telling you the Address has been blocked, you will see a browser error page.

6.  My Linksys mesh router isn't working with my ISP's 5G router.  What should I do?

For the Linksys mesh router to work with a 5G router, your ISP must provide a 5G router with an ethernet port for connection to the parent node.


7.  Does this support IPv6 RD for its internet connection?

Yes. It supports IPv6 RD and 6to4 tunneling.

Was this support article useful?

Additional Support Questions?
Search Again